Maintaining the NuWave Oxypure filtration system helps ensure clean water and optimal appliance performance. This guide provides practical, safe steps to clean Oxypure filters and related components, using the right tools and materials.
Readers will find a clear process, safety tips, and troubleshooting strategies to handle common issues without unnecessary mess or downtime.
Quick Answer
Use the dedicated cleaning tools and spray bottle to rinse and scrub the filter elements, then reassemble with a fresh cartridge or replacement parts as needed. Always rinse thoroughly, allow components to dry completely, and recheck connections for leaks before returning the unit to service.
What You’ll Need
- NuWave Oxypure filter cleaning brush
- Oxypure water filter cleaning kit NuWave
- NuWave filter cartridge cleaner brush
- water filter cleaning tool set replacement cartridge NuWave
- NuWave Oxypure filter cleaning spray bottle
Before You Start
Before beginning, unplug the unit and ensure the storage area is clean and dry. Have a tray ready to catch dripping water and a soft towel for drying parts. Beware of hot water and sharp edges when handling components. The overall cleaning process usually takes 15–30 minutes, depending on the filter model and any cartridge replacement needs.
Step-By-Step: How To Clean NuWave Oxypure Filters
- Turn off and unplug the unit, then relieve any water pressure from the system following the manufacturer’s quick-release steps.
- Disconnect the filter housing and remove the Oxypure filter cartridge, placing it on a clean surface.
- Rinse the filter housing with lukewarm water to remove loose debris; avoid abrasive cleaners.
- Use the NuWave Oxypure filter cleaning brush to gently scrub the interior surfaces and crevices where buildup tends to occur.
- Apply a small amount of NuWave filter cartridge cleaner brush to stubborn spots, then rinse again until the water runs clear.
- Spritz the inside of the housing and cartridge with the NuWave Oxypure filter cleaning spray bottle, letting it sit briefly before a final rinse.
- Dry all components with a clean towel and allow them to air-dry completely before reassembly.
- Install a new replacement cartridge if needed; re-seat the cartridge firmly and reassemble the housing, ensuring all seals are aligned.
- Reconnect the unit, run water through the system for several minutes without using the full flow, and check for leaks.
- Resume normal operation and monitor performance over the next few days to confirm effective cleaning.
Troubleshooting
| Symptom | Likely Cause | Fix | Prevention |
|---|---|---|---|
| Leaking at housing | Seal is misaligned or damaged | Re-seat seal, replace if worn | Inspect seals during cleaning |
| Weak water flow | Clogged cartridge or debris in line | Clean or replace cartridge; flush system | Regular maintenance and pre-filter checks |
| Unpleasant odor | Buildup on cartridge or housing | Thorough cleaning with brush and spray bottle | Clean every 1–3 months depending on usage |
| Water discoloration after cleaning | Residual debris | Run extended flush cycle | Rinse until clear before use |
Common Mistakes
- Using abrasive scrubbers on delicate filter surfaces
- Omitting thorough drying before reassembly
- Overlooking seals and O-rings, leading to leaks
- Using harsh chemicals not specified for NuWave filters
Attention to these details helps maintain filter efficiency and prolongs component life.
Tips For Best Results
- Schedule routine cleanings to prevent buildup and maintain flow rates.
- Label replaced cartridges with the date of installation for easy maintenance tracking.
- Use the included spray bottle to apply a light, even mist on all interior surfaces.
- Always rinse thoroughly to avoid residue affecting taste or filtration performance.
Call A Professional
Consider contacting a professional if the unit shows persistent leaks, unusual noises, or if the cleaning process reveals damaged seals, cracked housings, or a clearly degraded cartridge that cannot be replaced locally.
FAQ
How often should I clean the NuWave Oxypure filters?
Cleanings typically occur every 1–3 months, depending on usage and water quality.
Can I use other cleaners with the Oxypure filters?
Only cleaners specified by NuWave should be used to avoid damage or chemical reactions.
Is it necessary to replace the cartridge during cleaning?
Not always, but replacement is recommended if the cartridge appears worn or if flow remains weak after cleaning.
What should I do if water still smells after cleaning?
Rinse again, flush longer, and inspect seals; if odor persists, replace the cartridge and consult support.
Buying Guide
When choosing components or replacements for the NuWave Oxypure system, consider several factors to ensure optimal performance and compatibility. Size matters for installation space; confirm model compatibility with the existing unit. Noise level, while typically low, can affect locations near living spaces. Look for energy efficiency and minimal power draw in any pumps or related accessories. Controls should be intuitive, allowing straightforward maintenance reminders. Finally, consider placement: keep filter housings accessible and away from extreme temperatures or direct sunlight to preserve seals and plastic parts. If in doubt, compare kit contents and included tools to ensure that you have everything needed for regular maintenance and potential cartridge replacements.