Clean and maintain Resound hearing aids regularly to preserve sound quality, maximize battery life, and extend device comfort. Proper care helps prevent wax buildup, moisture damage, and performance issues. This guide provides practical, step-by-step instructions using common Resound cleaning tools and accessories.
Quick Answer
Use a dedicated Resound hearing aid cleaning kit and cleaning tools to gently remove wax and debris, dry the device after use, and store it in a drying kit. Regular daily cleaning plus weekly deep cleaning keeps performance at its best.
What You’ll Need
- Resound hearing aid cleaning kit
- Hearing aid cleaning tools set compatible with Resound
- Resound desiccant drying kit for hearing aids
- Microfiber cloth for Resound hearing aids
- Resound hearing aid wax pick and cleaning brush
Before You Start
Before cleaning, wash hands and ensure the area is well lit. Gently remove batteries or open battery doors if applicable. Avoid submerging the devices in water; never use household cleaners, alcohol, or solvents. If the device is damaged, stop cleaning and contact a professional. Time estimate: 5–15 minutes for routine cleaning, longer for a full deep clean.
Cautious note: Do not attempt to insert metal objects into the microphone ports or vents. Excessive force can damage internal components. Keep cleaning tools stored with the cleaning kit to prevent loss.
Step-By-Step: Cleaning Resound Hearing Aids
- Remove any moisture or condensation by gently patting the exterior with a microfiber cloth for Resound hearing aids.
- Wipe the outside surfaces with the microfiber cloth, avoiding the battery compartment unless instructed by the device manual.
- Use the Resound hearing aid wax pick and cleaning brush to carefully dislodge visible wax from crevices and the sound outlet.
- Lightly brush the tubing or dome (for behind-the-ear models) to remove hair or lint that can impede airflow.
- Inspect the microphone and receiver areas for debris; if stubborn buildup remains, use a soft cleaning tool designed for Resound devices—do not insert metal objects.
- Place the cleaned device into the Resound desiccant drying kit for hearing aids and seal it according to the kit’s instructions to remove residual moisture.
- Turn off or remove the battery if applicable, then reinsert or reseal the battery door after drying is complete.
- Perform a quick functional check by turning the device on and confirming a clear, sound-producing signal.
- Store the hearing aids in a clean, dry place away from heat sources and direct sunlight.
- Schedule routine weekly cleaning sessions to maintain optimal performance and hygiene.
- If inline filters or domes show wear, replace them as recommended in the user guide or cleaning kit instructions.
- For stubborn moisture or persistent odor, repeat the drying step or consult the manufacturer’s guidance.
Troubleshooting
| Symptom | Likely Cause | Fix | Prevention |
|---|---|---|---|
| Whistling or feedback | Improper seating or wax blockage | Re-seat, clean the outlet, replace wax guard | Regular cleaning and check for wax buildup |
| Reduced volume or clarity | Moisture or debris in receiver | Dry in desiccant kit; clean with appropriate tool | Daily wipe and weekly drying routine |
| Intermittent sound | Debris in microphone port | Carefully remove debris with wax pick | Gentle, consistent cleaning habit |
| Battery drain | Moisture or faulty battery | Dry thoroughly; replace battery if needed | Store in desiccant kit when not in use |
Common Mistakes
- Using household cleaners or water on the electronics
- Inserting metal tools into small ports
- Skipping the drying step after cleaning
- Neglecting to replace worn domes or wax guards
Tips For Best Results
- Establish a daily quick wipe with a microfiber cloth to remove surface oil and debris.
- Combine cleaning with storage in a dedicated desiccant drying kit to combat moisture.
- Keep a dedicated set of cleaning tools specifically for Resound products to avoid cross-contamination.
- Follow the manufacturer’s recommended replacement schedule for wax guards and domes.
Call A Professional
Schedule professional servicing if there is persistent distortion, unusual sounds, or signs of water damage. If cleaning tools or kits fail to restore performance after repeated attempts, contact an audiology clinic or the device manufacturer for inspection.
FAQ
How often should I clean my Resound hearing aids?
Daily quick cleaning with a microfiber cloth and a weekly thorough cleaning using the wax pick and cleaning brush is recommended, followed by drying in a desiccant kit after each cleaning session.
Can I use regular tissue or wipes on Resound devices?
No. Use only the recommended microfiber cloth and device-specific cleaning tools to avoid residue and damage.
What should I do if moisture remains after drying?
Return the device to the desiccant drying kit for additional drying cycles and, if necessary, consult a professional for moisture assessment.
Are there safety precautions I should follow during cleaning?
Yes. Avoid liquids near electronic ports, never insert metal objects, and disconnect the power source when cleaning to prevent electrical damage.
How long does the drying kit take to complete?
Most drying cycles take a few hours; check the kit instructions for exact timing and recommended frequency.
Buying Guide
Choosing cleaning supplies for Resound hearing aids involves balancing effectiveness, compatibility, and ease of use. Consider the following factors to make an informed purchase.
Size and compatibility
Ensure the cleaning tools set and wax pick are compatible with Resound devices and your specific model. A compact kit that includes multiple implements can simplify routine care.
Noise level and ease of use
Look for tools designed for quiet operation and smooth handling. A soft-bristled brush and a non-abrasive wax pick minimize the risk of scratching or damaging components.
Energy efficiency and storage
Desiccant drying kits typically use passive or low-energy drying methods. Choose a compact, portable kit that fits your lifestyle and travel needs.
Controls and maintenance
Choose cleaning tools with simple, intuitive use and clear instructions. Integrated kits with clear labeling reduce the chance of improper use.
Placement and accessibility
Store cleaning supplies in a dedicated, dry drawer or container near your hearing aids. Visible labeling helps everyone in the household use the correct tools.