A Pela case protects a phone while using eco-friendly materials. Proper cleaning helps preserve its appearance and hygienic benefits. This guide provides a practical, step-by-step approach using commonly available tools, without compromising the case’s integrity.
Quick Answer
Fast method: dry brush the case to remove loose debris, then wipe with isopropyl alcohol wipes for electronics cleaning 70% or use a microfiber cleaning cloth for phone case cleaning. For stubborn grime, use an ultrasonic cleaner for phone case on a short cycle with gentle settings. Finish with a soft bristle cleaning brush for phone case and a microfiber cloth to dry and polish.
What You’ll Need
- Soft bristle cleaning brush for phone case
- Microfiber cleaning cloth for phone case cleaning
- Ultrasonic cleaner for phone case
- Phone case cleaning kit with brush and cloth
- Isopropyl alcohol wipes for electronics cleaning 70%
Before You Start
Before cleaning, remove the phone from the Pela case and power down the device where possible. Work in a well-lit area and keep liquids away from openings. Avoid soaking the case for long periods, which can affect materials. Test any cleaner on a small, inconspicuous area first to ensure colorfastness or texture integrity. Estimate: cleaning 5–15 minutes per session.
Step-By-Step: How To Clean Pela Case
- Dry any loose debris and shake out dust from the case using the clean side of a microfiber cloth.
- Inspect for stains and note areas that may need targeted attention (corners, buttons, camera cutouts).
- Apply a mild cleaner using isopropyl alcohol wipes for electronics cleaning 70% or a damp microfiber cloth. Wipe gently to avoid excess moisture.
- Brush away remaining grime with the soft bristle cleaning brush for phone case, focusing on crevices and textured surfaces.
- Use an ultrasonic cleaner for phone case on a short, gentle cycle if the case is heavily soiled or has stuck-on grime. Remove promptly and dry.
- Rinse and dry if the cleaner requires rinsing, then pat dry with a clean microfiber cloth. Allow to air dry completely before reinserting the phone.
- Final polish buff with a dry microfiber cloth to restore luster and remove any remaining streaks.
- Sanitize exposure areas wipe exterior surfaces lightly to remove any residual moisture and ensure a clean finish.
- Reinspect check for remaining spots and repeat only on those areas if necessary.
- Reassemble place the phone back in the Pela case and ensure a snug fit.
Troubleshooting
| Symptom | Likely Cause | Fix | Prevention |
|---|---|---|---|
| Streaks after cleaning | Residue or moisture | Buff with dry microfiber cloth; ensure case is fully dry | Dry thoroughly after cleaning |
| Stains persist | Deep-set grime | Lightly re-clean with brush and isopropyl wipes | Clean regularly to prevent buildup |
| Discoloration | Material sensitivity or cleaners | Switch to gentler cleaning method or test elsewhere | Avoid harsh chemicals |
| Loose fit after cleaning | Excess moisture or warping | Ensure complete drying and recheck fit | Air-dry fully before use |
Common Mistakes
- Using bleach or abrasive cleaners that can damage the case material.
- Soaking the case for too long, which can affect finish and elasticity.
- Cleaning while the phone is inside the case or with excessive moisture on the surface.
- Skipping drying time, which may lead to moisture under the edges.
Tips For Best Results
- Clean regularly to prevent buildup, especially around seams and cutouts.
- Use a dedicated cleaning kit for electronics to avoid cross-contamination with other surfaces.
- Store the case in a dry, shaded area after cleaning to maintain color and texture.
- Test every cleaner on a hidden area to verify compatibility with Pela case materials.
Call A Professional
Contact a professional if the case shows significant cracking, yellowing, or warping that cleaning cannot reverse. Seek help if the case develops strong odors after cleaning or if the device shows moisture inside the case after reassembly.
FAQ
Can I use hardware store cleaners on a Pela case?
Yes, but choose mild cleaners and test first on a hidden area to avoid damage.
Is it safe to use an ultrasonic cleaner?
Yes, on a short cycle and with gentle settings; avoid prolonged exposure or high temperatures.
How often should I clean my Pela case?
Cleaning every 1–2 weeks is reasonable with regular use; more often if exposed to grime or moisture.
Will cleaning affect the antimicrobial properties of the case?
Standard cleaning generally preserves properties; avoid aggressive chemicals that could degrade coatings.
Buying Guide
When choosing cleaning supplies for a Pela case, consider size compatibility, safety for plastics and silicone blends, and ease of use. Look for a dedicated phone case cleaning kit with a brush and cloth for routine maintenance. For tougher grime, an ultrasonic cleaner for phone case can help, provided it offers gentle cycles and timer control. Compatibility with isopropyl alcohol wipes for electronics cleaning 70% ensures broader cleaning options. A microfiber cleaning cloth for phone case cleaning rounds out the set, delivering streak-free results. Overall, select tools that fit your cleaning cadence and storage space, ensuring the case remains hygienic without compromising material integrity.